Vulnerability feed

OPNsense is a FreeBSD based firewall and routing platform. Prior to 26.1.11, OPNsense\Core\ACL::hasPrivilege() appends a directly assigned comma-separated <priv> value as one string and then uses an exact comparison when checking user-config-readonly. A user directly assigned both a component write privilege and user-config-readonly can therefore be treated as lacking the read-only restriction, and MVC APIs protected by throwReadOnly() can persist configuration changes for that component. Group privileges are not affected by the same parser flaw because the group path already splits comma-separated values. This issue is fixed in version 26.1.11.

OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the unauthenticated WebGUI login usernamefld accepts carriage-return and line-feed characters that survive LOG_AUTH processing through syslog-ng-lockout.conf into the syslog-ng program destination feeding lockout_handler. The consumer's readline() processing treats an injected fragment as a separate authentication event and selects the first syntactically valid IP address from the forged line. An attacker with network access to the login page can forge failure events for another IP, causing that IP to be added to the sshlockout PF table and its active states to be killed, or forge accepted events that reset an attacker's own brute-force counter. This can block administrative, DNS, gateway, or monitoring addresses and can bypass password-guessing lockout without authentication. This issue is fixed in version 26.1.11.

OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the safe-delete path reached through ApiMutableModelControllerBase::delBase() interpolates an unvalidated safe-delete token from the request URL into an XPath expression over config.xml before confirming that the token is a valid identifier. A user holding any one affected module privilege can send a crafted token to one of 21 affected delete endpoints covering Traffic Shaper, DHCP relay, Dnsmasq, Firewall Category, or Kea DHCP, causing the XPath to match configuration data across modules. The resulting error response exposes configuration item names, descriptions, reference paths, and UUIDs and provides an XPath substring-presence oracle, including for modules the user cannot otherwise access. The request does not modify configuration or perform a deletion. This issue is fixed in version 26.1.11.

OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, src/www/system_advanced_admin.php reads certificate records into $a_cert but omits that array from legacy_html_escape_form_data() before rendering each certificate descr value in the SSL Certificate selector. The certificate description accepts HTML metacharacters, allowing a user with the page-system-certmanager privilege to store markup that executes when another user opens System Settings Administration. This issue is fixed in version 26.1.11.

OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the OpenVPN Client Specific Override common_name field accepts path traversal sequences and openvpn_csc_conf_write() concatenates the value into /var/etc/openvpn-csc/<vpnid>/<common_name> without normalization or a basename check. The affected event handlers are client_connect.php and user_pass_verify.php. An authenticated user with Client Specific Override privileges can store the traversal value, and a matching OpenVPN client-connect or authentication event causes a generated CSO file to be written outside the intended directory. The file content is generated OpenVPN configuration rather than arbitrary bytes, and practical exploitation requires the attacker to cause a matching common name or username to be processed. This issue is fixed in version 26.1.11.

OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the NTP GPS page stores the operator-supplied initcmd value in base64 form, applies legacy_html_escape_form_data() to the encoded string, and then uses base64_decode() to decode the value directly into the GPS initialization-command textarea in src/www/services_ntpd_gps.php. Because decoding occurs after escaping, stored HTML remains unescaped at the output sink. A user with page-services-ntp-gps privilege can store a value that closes the textarea, and script executes in the session of any user who later opens the GPS page. The script can read CSRF material and perform authenticated actions, including actions available to an administrator. This issue is fixed in version 26.1.11.

OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, Firewall Rules and NAT views place stored category names and alias descriptions into HTML title attributes in filter_rule.volt and nat_rule.volt without quote-safe encoding. The response layer uses ENT_NOQUOTES, so a double quote survives and closes the attribute, allowing an event-handler attribute to be added to the existing span. A user with Firewall Categories or Firewall Alias Edit privileges can store a category name or alias description; the category must be assigned to a filter or NAT rule, or the alias must be referenced by a rule source or destination, and the rule must be saved so the affected tooltip is rendered. Script then executes in the session of an administrator or other user who opens the affected Rules or NAT page. The script can access CSRF material and perform authenticated actions as the victim. This issue is fixed in version 26.1.11.

OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the OpenVPN connection-status dashboard widget in src/opnsense/www/js/widgets/OpenVPNClients.js and the connection-status view place a client common_name into data-common-name attributes without quote-safe encoding. Exploitation requires an OpenVPN server configured with username-as-common-name and RADIUS or LDAP authentication, plus the ability to provision or self-register a valid backend username containing a double quote; deployments where the same administrator controls both the identity backend and firewall do not cross a separate trust boundary. An authenticated client using that username can close the attribute and add an event handler, while the local user database is not affected because its username validator rejects quotes. Script executes in an administrator's session when the administrator opens the dashboard or connection-status page and the injected event is triggered; the demonstrated payload used pointer movement over the client row rather than unconditional page-load execution. The advisory demonstrates that the script can read config.xml, invoke privileged APIs, reset the root password, and obtain root command execution. This issue is fixed in version 26.1.11.

OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the Firewall Alias GeoIP importer's process_zip() and process_gzip() paths in src/opnsense/scripts/filter/lib/alias/geoip.py use an unvalidated CSV country_code value to construct output filenames below /usr/local/share/GeoIP/alias. A user with Firewall Alias Edit privilege can configure an attacker-controlled GeoIP source URL and supply an archive whose country code traverses into another existing directory, causing attacker-controlled content to be written as root with an -IPv4 or -IPv6 suffix. A crafted newsyslog fragment and oversized log file can use the default hourly root cron job to execute commands as root, resulting in complete firewall compromise. This issue is fixed in version 26.1.11.

OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.10, the Trust module stores attacker-controlled certificate authority and certificate refid values and interpolates them into XPath expressions in src/opnsense/mvc/app/models/OPNsense/Trust/FieldTypes/CAsField.php and src/opnsense/mvc/app/models/OPNsense/Trust/FieldTypes/CertificatesField.php. A user with CA Manager or Certificate Manager privileges can submit a crafted refid and repeatedly retrieve the object to obtain a boolean refcount oracle, allowing values in config.xml to be recovered character by character. Exposed values can include password hashes, API credentials, certificate private keys, VPN key material, and high-availability credentials, enabling privilege escalation and compromise of other security domains. This issue is fixed in version 26.1.10.